Brother International WP700D Owners Manual - English - Page 81
mistakenly
View all Brother International WP700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
RD PROCES 1. Press III NU to display the menu. 2. Use (77- ) and to select DISK COPY, and press RETURN . The following message appears: Insert source disk and press RETURN. • Accelerator: Instead of (2), type "O". 3. Insert the source (original) diskette and press RETURN . The word processor will start reading files from the source diskette. Since the memory space is limited, the word processor may not be able to read all files in one step. After a while, this message will appear: [insert destination disk and press RETURN. 4. Insert the destination diskette and press (RETURN7. The word processor will transfer the files that have been read from the source diskette onto the destination diskette. If all the files of the source diskette have not been transferred yet, the word processor will ask you to re-insert the source diskette. repeat steps (2) and (3) until all files have been transferred to the destination diskette. You may need to swap these diskettes a number of times before all of the files are copied to the destination diskette. NOTE: The word processor "knows" which diskette is the source diskette and which one is the destination diskette. If you mistakenly insert a wrong diskette, one of these messages will appear: Incorrect disk. Insert destination disk and press RETURN. Incorrect disk. Insert source disk and press RETURN. NOTE: You may press (CANCEL at any time (except during diskette access) to cancel the operation. When copying is complete, the INDEX screen reappears. 73