Brother International WP700D Owners Manual - English - Page 97

NOTES: • Margins cannot be set while in display mode (centering, right margin flush, decimal tab) or in UL mode. • There must be at least two inches between margins. • The margin settings are reset to their default values when you switch the power off, then on. Selecting the Pitch CODE 1 PITCH Pressing CODE PITCH changes the pitch through the following cycle: PITCH:10 -> 12 -> 15 -> 10 Pitch Number of Characters per inch 10 (PICA) 10 characters per inch 12 (ELITE) 12 characters per inch L0_u 15 (MICRON) 15 characters per inch NOTES: • The pitch cannot be changed while in display mode (centering, right margin flush, decimal tab mode). • The pitch can be changed in UL mode only before entering text on the screen. • The pitch setting is reset to its default value when you switch the power off, then on. Selecting the Line Space CODE 2 LINE Pressing CODE LINE changes the line space through the following cycle: L.SP:1.0 -, 1.5 -3 2.0 -9 1.0 Line Spacing 1.0 1.5 2.0 Number of Lines per inch 6 lines per inch 4 lines per inch 3 lines per inch NOTE: The line space setting is reset to its default value when you switch the power off, then on. 89