D-Link DGS-1510-28P User Manual - Page 104

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Figure 5-20 Auto Surveillance Properties window The fields that can be configured for Global Settings are described below: Parameter Surveillance VLAN Surveillance VLAN ID Surveillance VLAN CoS Aging Time Description Select this option to enable or disable the surveillance VLAN state Enter the surveillance VLAN ID. The range is from 2 to 4094. Select the priority of the surveillance VLAN from 0 to 7. Enter the aging time of surveillance VLAN. The range is from 1 to 65535 minutes. The default value is 720 minutes. The aging time is used to remove a port from surveillance VLAN if the port is an automatic surveillance VLAN member. When the last surveillance device stops sending traffic and the MAC address of this surveillance device is aged out, the surveillance VLAN aging timer will be started. The port will be removed from the surveillance VLAN after expiration of surveillance VLAN aging timer. If the surveillance traffic resumes during the aging time, the aging timer will be reset and stop. Click the Apply button to accept the changes made. The fields that can be configured for Port Settings are described below: Parameter Unit From Port / To Port State Description Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select this option to enable or disable the state of the port. Click the Apply button to accept the changes made. 96