D-Link DGS-1510-28P User Manual - Page 159

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide weight is replenished. When weights of all CoS queues reach 0, the weights get replenished at a time. Click the Apply button to accept the changes made. Queue Settings This window is used to view and configure the queue settings. To view the following window, click QoS > Basic Settings > Queue Settings, as shown below: Figure 7-3 Queue Settings window The fields that can be configured are described below: Parameter Unit From Port / To Port Queue ID WRR Weight WDRR Quantum Description Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Enter the queue ID value here. This value must be between 0 and 7. Enter the WRR weight value here. This value must be between 0 and 127. To satisfy the behavior requirements of Expedited Forwarding (EF), the highest queue is always selected by the Per-hop Behavior (PHB) EF and the schedule mode of this queue should be strict priority scheduling. So the weight of the last queue should be zero while the Differentiate Service is supported. Enter the WDRR quantum value here. This value must be between 0 151