D-Link DGS-1510-28P User Manual - Page 56
Session Timeout, Telnet Settings, Telnet State, Apply, Web Setting, Web State
View all D-Link DGS-1510-28P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Figure 4-21 Telnet/Web window The fields that can be configured for Telnet Settings are described below: Parameter Telnet State Port Description Select this option to enable or disable the configuration through Telnet. Enter the TCP port number used for Telnet management of the Switch. The "well-known" TCP port for the Telnet protocol is 23. Click the Apply button to accept the changes made. The fields that can be configured for Web Setting are described below: Parameter Web State Port Description Select this option to enable or disable the configuration through the web. Enter the TCP port number used for Telnet management of the Switch. The "well-known" TCP port for the Telnet protocol is 80. Click the Apply button to accept the changes made. Session Timeout This window is used to configure the session timeout. To view the following window, click Management > Session Timeout, as shown below: Figure 4-22 Session Timeout window The fields that can be configured are described below: Parameter Web Session Timeout Description Enter the time in seconds of the web session timeout. Tick the Default 48