D-Link DGS-1510-28P User Manual - Page 136

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Figure 5-51 LLDP Port Settings window The fields that can be configured are described below: Parameter Unit From Port / To Port Subtype Admin State IP Subtype Action Address Description Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select the subtype of LLDP TLV(s). Options to choose from are MAC Address, and Local. Select the local LLDP agent and allow it to send and receive LLDP frames on the port. Options to choose from are TX, RX, TX and RX, and Disabled. TX - The local LLDP agent can only transmit LLDP frames. RX - The local LLDP agent can only receive LLDP frames. TX and RX - The local LLDP agent can both transmit and receive LLDP frames. Disabled - The local LLDP agent can neither transmit nor receive LLDP frames. The default value is TX and RX. Select the type of the IP address information to be sent. Options to choose from are All, IPv4 and IPv6. Select this option to enable or disable the action field Enter the IP address that will be sent. Click the Apply button to accept the changes made. NOTE: The IPv4 or IPv6 address entered here should be an existing LLDP management IP address. 128