D-Link DGS-1510-28P User Manual - Page 57

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Console Session Timeout Telnet Session Timeout SSH Session Timeout check box to return to the default setting. The value is from 60 to 36000 seconds. The default value is 180 seconds. Enter the time in minutes of the web session timeout. Tick the Default check box to return to the default setting. The value is from 0 to 1439 minutes. 0 means never timeout. The default value is 3 minutes. Enter the time in minutes of the Telnet session timeout. Tick the Default check box to return to the default setting. The value is from 0 to 1439 minutes. 0 means never timeout. The default value is 3 minutes. Enter the time in minutes of the SSH session timeout. Tick the Default check box to return to the default setting. The value is from 0 to 1439 minutes. 0 means never timeout. The default value is 3 minutes. Click the Apply button to accept the changes made. DHCP Service DHCP This window is used to configure the DHCP relay service on the Switch. To view the following window, click Management > DHCP > Service DHCP, as shown below: Figure 4-23 Service DHCP window The fields that can be configured for Service DHCP are described below: Parameter Service DHCP State Description Select this option to enable or disable the DHCP relay service. Click the Apply button to accept the changes made. The fields that can be configured for Service IPv6 DHCP are described below: Parameter Service IPv6 DHCP State Description Select this option to enable or disable the IPv6 DHCP relay service. Click the Apply button to accept the changes made. DHCP Class Settings This window is used to configure and display the DHCP class and the DHCP option matching pattern for the DCHP class. To view the following window, click Management > DHCP > Service DHCP, as shown below: 49