D-Link DGS-1510-28P User Manual - Page 241
Protocol Type, dynamic, Source, Prefix Length, Destination, Prefix, Length, Source Port, Range, Destination Port
View all D-Link DGS-1510-28P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 241 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide After selecting the UDP option as the Protocol Type, the following page and parameters will be available, as shown below: Figure 8-68 Extended IPv6 ACL (Add Rule) UDP window The dynamic fields that can be configured are described below: Parameter Source Destination Source Port Destination Port Description Select and enter the source information here. Options to choose from are Any, Host, and IPv6. When the Any option is selected, any source traffic will be evaluated according to the conditions of this rule. When the Host option is selected, enter the source host's IPv6 address here. When the IPv6 option is selected, the Prefix Length option will also be available. Enter the source IPv6 address and prefix length value in the spaces provided. Select and enter the destination information here. Options to choose from are Any, Host, and IPv6. When the Any option is selected, any destination traffic will be evaluated according to the conditions of this rule. When the Host option is selected, enter the destination host's IPv6 address here. When the IPv6 option is selected, the Prefix Length option will also be available. Enter the destination IPv6 address and prefix length value in the spaces provided. Select and enter the source port value here. Options to choose from are and Range. When selecting the = option, the specific selected port number will be used. When selecting the > option, all ports greater than the selected port, will be used. When selecting the < option, all ports smaller than the selected port, will be used. When selecting the ≠ option, all ports, excluding the selected port, will be used. When selecting the Range option, the start port number and end port number selected, of the range, will be used. Alternatively, the port number(s) can manually be entered in the space(s) provided, if the port number(s) is/are not available in the drop-down list. Select and enter the destination port value here. Options to choose 233