D-Link DGS-1510-28P User Manual - Page 257

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide DSCP TCP Flag VID CoS Time Range Select or enter the DSCP value used here. This value must be between 0 and 63. Tick the appropriate TCP flag option to include the flag in this rule. Options to choose from are ack, fin, psh, rst, syn, and urg. Enter the VLAN ID that will be associated with this ACL rule here. This value must be between 1 and 4094. Select the Class of Service (CoS) value here. Options to choose from are from 0 to 7. Enter the name of the time range to associate with this ACL rule. After selecting the UDP option as the Protocol Type, the following page and parameters will be available, as shown below: Figure 8-88 Extended Expert ACL (Add Rule) UDP window The dynamic fields that can be configured are described below: Parameter Source IP Address Description Select and enter the source information here. Options to choose from are Any, Host, and IP. When the Any option is selected, any source traffic will be evaluated according to the conditions of this rule. When the Host option is selected, enter the source host's IP address here. When the IP option is selected, the Wildcard option will also be available. Enter the group of source IP addresses by using a wildcard bitmap. The bit corresponding to the bit value 1 will be ignored. The bit corresponding to the bit value 0 will be checked. 249