D-Link DGS-1510-28P User Manual - Page 91
Multicast Static FDB, MAC Address Table Settings
View all D-Link DGS-1510-28P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Multicast Static FDB This window is used to view and configure the multicast static FDB settings. To view the following window, click L2 Features > FDB > Static FDB > Multicast Static FDB, as shown below: Figure 5-2 Multicast Static FDB window The fields that can be configured are described below: Parameter Unit From Port / To Port VID MAC Address Description Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Enter the VLAN ID of the VLAN the corresponding MAC address belongs to. Enter the static destination MAC address of the multicast packets. This must be a multicast MAC address. The format of the destination MAC address is 01-XX-XX-XX-XX-XX. Click the Apply button to accept the changes made. Click the Delete All button to remove all the entries. Click the Delete button to remove the specific entry. MAC Address Table Settings This window is used to view and configure the MAC address table's global settings. To view the following window, click L2 Features > FDB > MAC Address Table Settings, as shown below: Figure 5-3 MAC Address Table Settings (Global Settings) window The fields that can be configured are described below: Parameter Aging Time Description Enter the MAC address table's aging time value here. This value must be between 10 and 1000000 seconds. Entering 0 will disable MAC address aging. By default, this value is 300 seconds. 83