D-Link DGS-1510-28P User Manual - Page 293

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Server Timeout Supp Timeout TX Period (PAE) authenticator. Enter the server timeout value here. This value must be between 1 and 65535 seconds. By default, this value is 30 seconds. Enter the supplicant timeout value here. This value must be between 1 and 65535 seconds. By default, this value is 30 seconds. Enter the transmission period value here. This value must be between 1 and 65535 seconds. By default, this value is 30 seconds. Click the Apply button to accept the changes made. Authentication Session Information This window is used to view and configure the authentication session information. To view the following window, click Security > 802.1X > Authentication Session Information, as shown below: Figure 9-14 Authentication Session Information window The fields that can be configured are described below: Parameter Unit From Port / To Port Description Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Click the Init by Port button to initiate the session information based on the selections made. Click the ReAuth by Port button to re-authenticate the session information based on the selections made. Authenticator Statistics This window is used to view and clear the authenticator statistics. To view the following window, click Security > 802.1X > Authenticator Statistics, as shown below: Figure 9-15 Authenticator Statistics window 285