D-Link DGS-1510-28P User Manual - Page 90
Layer 2 Features, FDB, Static FDB, Unicast Static FDB
View all D-Link DGS-1510-28P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide 5. Layer 2 Features FDB VLAN Spanning Tree Loopback Detection Link Aggregation L2 Multicast Control LLDP FDB Static FDB Unicast Static FDB This window is used to view and configure the static unicast forwarding settings on the Switch. To view the following window, click L2 Features > FDB > Static FDB > Unicast Static FDB, as shown below: Figure 5-1 Unicast Static FDB window The fields that can be configured are described below: Parameter Port / Drop Unit Number Port Number VID MAC Address Description Allows the selection of the port number on which the MAC address entered resides This option could also drop the MAC address from the unicast static FDB. When selecting Port, select the switch unit and port number. Select the switch unit that will be used for this configuration here, when Port is selected in the previous drop-down list. Select the port number used here, when Port is selected in the previous drop-down list. Enter the VLAN ID on which the associated unicast MAC address resides. Enter the MAC address to which packets will be statically forwarded or dropped. This must be a unicast MAC address. Click the Apply button to accept the changes made. Click the Delete All button to delete all the entries found in the display table. Click the Delete button to remove the specified entry. 82