D-Link DGS-1510-28P User Manual - Page 347

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Figure 9-77 Safeguard Engine Settings window The fields that can be configured for Safeguard Engine Settings are described below: Parameter Safeguard Engine State Trap State Description Select to enable or disable the safeguard engine feature here. Select to enable or disable the safeguard engine trap state here. The fields that can be configured for CPU Utilization Settings are described below: Parameter Rising Threshold Falling Threshold Description Enter the rising threshold value here. This value must be between 20% and 100%. This value is used to configure the acceptable level of CPU utilization before the Safeguard Engine mechanism is enabled. Once the CPU utilization reaches this percentage level, the Switch will move into Exhausted mode, based on the parameters provided in this window. Enter the falling threshold value here. This value must be between 20% and 100%. This value is used to configure the acceptable level of CPU utilization as a percentage, where the Switch leaves the Safeguard Engine state and returns to normal mode. Click the Apply button to accept the changes made. CPU Protect Counters This window is used to view and clear the CPU protection counter information. To view the following window, click Security > Safeguard Engine > CPU Protect Counters, as shown below: Figure 9-78 CPU Protect Counters window The fields that can be configured are described below: Parameter Sub Interface Description Select the sub-interface option here. Options to choose from are Manage, Protocol, Route, and All. This option specifies to clear the 339