D-Link DGS-1510-28P User Manual - Page 247

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Time Range Enter the name of the time range to associate with this ACL rule. After selecting the None option as the Protocol Type, the following page and parameters will be available, as shown below: Figure 8-74 Extended IPv6 ACL (Add Rule) None window The dynamic fields that can be configured are described below: Parameter Fragments Source Destination DSCP Flow Label Time Range Description Select the Fragments option to include packet fragment filtering. Select and enter the source information here. Options to choose from are Any, Host, and IPv6. When the Any option is selected, any source traffic will be evaluated according to the conditions of this rule. When the Host option is selected, enter the source host's IPv6 address here. When the IPv6 option is selected, the Prefix Length option will also be available. Enter the source IPv6 address and prefix length value in the spaces provided. Select and enter the destination information here. Options to choose from are Any, Host, and IPv6. When the Any option is selected, any destination traffic will be evaluated according to the conditions of this rule. When the Host option is selected, enter the destination host's IPv6 address here. When the IPv6 option is selected, the Prefix Length option will also be available. Enter the destination IPv6 address and prefix length value in the spaces provided. Select or enter the DSCP value used here. This value must be between 0 and 63. Enter the flow label value here. This value must be between 0 and 1048575. Enter the name of the time range to associate with this ACL rule. Click the Back button to discard the changes made and return to the previous page. Click the Apply button to accept the changes made. 239