D-Link DGS-1510-28P User Manual - Page 348

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Protocol Name CPU protect related counters of sub-interfaces. Select the protocol name option here. Options to choose from are DHCP, ARP, DNS, GVRP, ICMPv4, ICMPv6-Neighbor, ICMPv6-Other, IGMP, LACP, SNMP, SSH, STP, Telnet, TFTP, Web, 802.1X, and All. Click the Clear button to clear the information based on the selections made. Click the Clear All button to clear all the information in this table. CPU Protect Sub-Interface This window is used to view and configure the CPU protection sub-interface settings. To view the following window, click Security > Safeguard Engine > CPU Protect Sub-Interface, as shown below: Figure 9-79 CPU Protect Sub-Interface window The fields that can be configured for CPU Protect Sub-Interface are described below: Parameter Sub-Interface Rate Limit Description Select the sub-interface option here. Options to choose from are Manage, Protocol, and Route. Enter the rate limit value used here. This value must be between 0 and 1024 packets per second. Tick the No Limit option to disable the rate limit. Click the Apply button to accept the changes made. The fields that can be configured for Sub-Interface Information are described below: Parameter Sub-Interface Description Select the sub-interface option here. Options to choose from are Manage, Protocol, and Route. Click the Find button to locate a specific entry based on the information entered. CPU Protect Type This window is used to view and configure the CPU protection type settings. To view the following window, click Security > Safeguard Engine > CPU Protect Type, as shown below: 340