D-Link DGS-1510-28P User Manual - Page 285
Port Security Address Entries, Security > Port Security > Port Security Address Entries
View all D-Link DGS-1510-28P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 285 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Security Mode Aging Time Aging Type from are Protect, Restrict, and Shutdown. Selecting Protect specifies to drop all packets from the insecure hosts at the portsecurity process level, but does not increment the security-violation count. Selecting Restrict specifies to drop all packets from the insecure hosts at the port-security process level and increments the security-violation count and record the system log. Selecting Shutdown specifies to shut down the port if there is a security violation and record the system log. Select the security mode option here. Options to choose from are Permanent and Delete-on-Timeout. Selecting Permanent specifies that under this mode, all learned MAC addresses will not be purged out unless the user manually deletes those entries. Selecting Deleteon-Timeout specifies that under this mode, all learned MAC addresses will be purged out when an entry is aged out or when the user manually deletes these entries. Enter the aging time value used for auto-learned dynamic secured addresses on the specified port here. This value must be between 0 and 1440 minutes. Select the aging type here. Options to choose from are Absolute and Inactivity. Selecting Absolute specifies that all the secure addresses on this port age out exactly after the time specified and is removed from the secure address list. This is the default type. Selecting Inactivity specifies that the secure addresses on this port age out only if there is no data traffic from the secure source address for the specified time period. Click the Apply button to accept the changes made. Port Security Address Entries This window is used to view, clear and configure the port security address entries. To view the following window, click Security > Port Security > Port Security Address Entries, as shown below: Figure 9-3 Port Security Address Entries window The fields that can be configured are described below: Parameter Unit From Port / To Port MAC Address VID Description Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Enter the MAC address here. Enter the VLAN ID here. This value must be between 1 and 4094. 277