D-Link DGS-1510-28P User Manual - Page 324
IPv6 Neighbor Binding, Security > IMPB > IPv6 > IPv6 Source Guard > IPv6 Neighbor
View all D-Link DGS-1510-28P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 324 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide IPv6 Neighbor Binding This window is used to view and configure the IPv6 neighbor binding settings. To view the following window, click Security > IMPB > IPv6 > IPv6 Source Guard > IPv6 Neighbor Binding, as shown below: Figure 9-58 IPv6 Neighbor Binding window The fields that can be configured for IPv6 Neighbor Binding Settings are described below: Parameter MAC Address VID IPv6 Address Unit From Port / To Port Description Enter the MAC address used here. Enter the VLAN ID used here. This value must be between 1 and 4094. Enter the IPv6 address used here. Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Click the Apply button to accept the changes made. The fields that can be configured for IPv6 Neighbor Binding Entry are described below: Parameter Unit From Port / To Port IPv6 Address MAC Address VID Description Select the switch unit that will be used for this search here. Select the appropriate port range used for the search here. Enter the IPv6 address to find here. Enter the MAC address to find here. Enter the VLAN ID to find here. Click the Find button to locate a specific entry based on the information entered. Click the Delete button to remove the specified entry. 316