D-Link DGS-1510-28P User Manual - Page 154

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Figure 6-14 IPv6 Interface - Detail, Interface IPv6 Address window Click the Restart button to restart DHCPv6 client on an interface. The fields that can be configured for DHCPv6 Client Settings are described below: Parameter Client State Description Select this option to enable or disable the DHCPv6 client state. Tick the Rapid Commit check box to proceed with two-message exchange for prefix delegation. Click the Apply button to accept the changes made. IPv6 Neighbor This window is used to configure and view the IPv6 neighbor settings. To view the following window, click L3 Features > IPv6 Neighbor, as shown below: Figure 6-15 IPv6 Neighbor window The fields that can be configured are described below: Parameter Interface VLAN IPv6 Address MAC Address Description Enter an interface VLAN ID. Enter the IPv6 address. Enter the MAC address. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Clear button to clear all the information for the specific port. Click the Clear All button to clear all the information in this table. 146