D-Link DGS-1510-28P User Manual - Page 139
LLDP Dot3 TLVs Settings, From Port / To Port, Port VLAN, Protocol VLAN, VLAN Name, Protocol Identity
View all D-Link DGS-1510-28P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Figure 5-54 LLDP Dot1 TLVs Settings window The fields that can be configured are described below: Parameter Unit From Port / To Port Port VLAN Protocol VLAN VLAN Name Protocol Identity Description Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select this option to enable or disable the port VLAN ID TLV to send. The Port VLAN ID TLV is an optional fixed length TLV that allows a VLAN bridge port to advertise the port's VLAN identifier (PVID) that will be associated with untagged or priority tagged frames. Select this option to enable or disable Port and Protocol VLAN ID (PPVID) TLV to send, and enter the VLAN ID in PPVID TLV. Select this option to enable or disable the VLAN name TLV to send, and enter the ID of the VLAN in the VLAN name TLV. Select this option to enable or disable the Protocol Identity TLV to send, and the protocol name. Options for protocol name to choose from are None, EAPOL, LACP, GVRP, STP, and All. Click the Apply button to accept the changes made. LLDP Dot3 TLVs Settings This window is used to configure an individual port or group of ports to exclude one or more IEEE 802.3 organizational specific TLV data type from outbound LLDP advertisements. To view the following window, click L2 Features > LLDP > LLDP Dot3 TLVs Settings, as show below: 131