D-Link DGS-1510-28P User Manual - Page 313

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Static ACL Select whether to use a static ACL or not here by either selecting Yes or No. Click the Add button to add a new entry based on the information entered. Click the Delete button to remove an entry based on the information entered. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. ARP Inspection Port Settings This window is used to view and configure the ARP inspection port settings. To view the following window, click Security > IMPB > IPv4 > Dynamic ARP Inspection > ARP Inspection Port Settings, as shown below: Figure 9-44 ARP Inspection Port Settings window The fields that can be configured are described below: Parameter Unit From Port / To Port Rate Limit Burst Interval Description Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Enter the rate limit value here. This value must be between 1 and 150 packets per seconds. Enter the burst interval value here. This value must be between 1 and 305