D-Link DGS-1510-28P User Manual - Page 33

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Figure 3-17 System Log Server Settings window The fields that can be configured are described below: Parameter Host IPv4 Address Host IPv6 Address UDP Port Severity Facility Discriminator Name Description Enter the system log server's IPv4 address here. Enter the system log server's IPv6 address here. Enter the system log server's UDP port number here. This value must be 514 or between 1024 and 65535. By default, this value is 514. Select the severity value of the type of information that will be logged. Options to choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4 (Warnings), 5 (Notifications), 6 (Informational), and 7 (Debugging). Select the facility value here. Options to choose from are 0 to 23. Enter the discriminator name here. This name can be up to 15 characters long. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. System Log This window is used to view and clear the system log. To view the following window, click System > System Log > System Log, as shown below: Figure 3-18 System Log window Click the Clear Log button to clear the system log entries displayed in the table. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. System Attack Log This window is used to view and clear the system attack log. To view the following window, click System > System Log > System Attack Log, as shown below: 25