D-Link DGS-1510-28P User Manual - Page 50

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Group Name SNMP Version SNMP V3 Encryption Auth-Protocol Priv-Protocol IP Address-List Name identify the SNMP users. Enter the SNMP group name to which the user belongs. The syntax is general string that does not allow spaces. Select the SNMP version. Options to choose from are v1, v2c, and v3. When selecting v3 in the SNMP Version drop-down list, this option is available. Options to choose from are None, Password, and Key. When selecting v3 in the SNMP Version drop-down list, and selecting either Password or Key in the SNMP V3 Encryption drop-down list, this option is available. Select the authentication level. Options to choose from are MD5, and SHA. MD5 - Select to use the HMAC-MD5-96 authentication level. This field will require the user to enter a password or a key. SHA - Specify that the HMAC-SHA authentication protocol will be used. This field will require the user to enter a password or a key. When selecting v3 in the SNMP Version drop-down list, and selecting either Password or Key in the SNMP V3 Encryption drop-down list, this option is available. Select the private protocol. Options to choose from are None, and DES56. None - Specify that no authorization protocol is in use. DES56 - Specify that DES 56-bit encryption is in use, based on the CBC-DES (DES-56) standard. This field will require the user to enter a password or a key. Enter the standard IP access control list (ACL) to associate with the user. Click the Add button to add a new entry based on the information entered. Click the Delete button to remove the specified entry. SNMP Host Table Settings This window is used to configure and display the recipient of the SNMP notification. To view the following window, click Management > SNMP > SNMP Host Table Settings, as shown below: Figure 4-12 SNMP Host Table Settings The fields that can be configured are described below: Parameter Description 42