D-Link DGS-1510-28P User Manual - Page 307

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide When DHCP snooping station move is enabled, the dynamic DHCP snooping binding entry with the same VLAN ID and MAC address on the specific port can move to another port if it detects that a new DHCP process belong to the same VLAN ID and MAC address. Click the Apply button to accept the changes made. DHCP Snooping Port Settings This window is used to view and configure the DHCP snooping port settings. To view the following window, click Security > IMPB > IPv4 > DHCPv4 Snooping > DHCP Snooping Port Settings, as shown below: Figure 9-37 DHCP Snooping Port Settings window The fields that can be configured are described below: Parameter Unit From Port / To Port Entry Limit Rate Limit Description Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Enter the entry limit value here. This value must be between 0 and 1024. Tick the No Limit option to disable the function. Enter the rate limit value here. This value must be between 1 and 300. Tick the No Limit option to disable the function. 299