D-Link DGS-1510-28P User Manual - Page 25
PoE Status, Usage Threshold, Policy Preempt, Trap State, Apply, Show Detail
View all D-Link DGS-1510-28P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Figure 3-9 PoE System window The fields that can be configured are described below: Parameter Unit Usage Threshold Policy Preempt Trap State Description Select the switch unit that will be used for this configuration here. Enter the usage threshold to generate a log and send the corresponding standard notification. The range is from 1 to 99 percent. Select this option to enable or disable the disconnection of PD which in power-provisioned with lower priority in order to release the power to the new connected PD with higher priority under power shortage conditions. Select this option to enable or disable the sending of PoE notifications. Click the Apply button to accept the changes made. Click the Show Detail button to see the PoE system Parameters table at the bottom of the window. After clicking the Show Detail button, the following table will appear. PoE Status This window is used to configure the description, and display the PoE status of each port. To view the following window, click System > PoE > PoE Status, as shown below: 17