D-Link DGS-1510-28P User Manual - Page 271

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide IP Precedence ToS DSCP VID CoS Time Range destination traffic will be evaluated according to the conditions of this rule. When the Host option is selected, enter the destination host's MAC address here. When the MAC option is selected, the Wildcard option will also be available. Enter the destination MAC address and wildcard value in the spaces provided. Select the IP precedence value used here. Options to choose from are 0 (routine), 1 (priority), 2, (immediate), 3 (flash), 4 (flash-override), 5 (critical), 6 (internet), and 7 (network). After selecting the IP precedence value, select the Type-of-Service (ToS) value that will be used here. Options to choose from are 0 (normal), 1 (min-monetary-cost), 2 (max-reliability), 3, 4 (maxthroughput), 5, 6, 7, 8 (min-delay), 9, 10, 11, 12, 13, 14, and 15. Select or enter the DSCP value used here. This value must be between 0 and 63. Enter the VLAN ID that will be associated with this ACL rule here. This value must be between 1 and 4094. Select the Class of Service (CoS) value here. Options to choose from are from 0 to 7. Enter the name of the time range to associate with this ACL rule. After selecting the IP-in-IP option as the Protocol Type, the following page and parameters will be available, as shown below: Figure 8-97 Extended Expert ACL (Add Rule) IP-in-IP window The dynamic fields that can be configured are described below: Parameter Fragments Source IP Address Description Select the Fragments option to include packet fragment filtering. Select and enter the source information here. Options to choose from 263