D-Link DGS-1510-28P User Manual - Page 319

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide source IP address, source MAC address, VLAN ID, and arrival port must match any of the entries defined by either the IP source guard static binding entry or the DHCP snooping learned dynamic binding entry. Click the Apply button to accept the changes made. IP-MAC-Port Binding Blocked Entry This window is used to view and clear the IP-MAC-Port binding blocked entry table. To view the following window, click Security > IMPB > IPv4 > Advanced Settings > IP-MAC-Port Binding Blocked Entry, as shown below: Figure 9-52 IP-MAC-Port Binding Blocked Entry window The fields that can be configured are described below: Parameter Clear by Port Unit From Port / To Port Clear by MAC Clear All Description Select this option to clear the entry table based on the port(s) selected. Select the switch unit that will be clear here. Select the appropriate port range that will be cleared here. Select this option to clear the entry table based on the MAC address entered. Enter the MAC address that will be cleared in the space provided. Select this option to clear all entries that contain MAC addresses. Click the Apply button to accept the changes made. IPv6 IPv6 Snooping This window is used to view and configure the IPv6 snooping settings. To view the following window, click Security > IMPB > IPv6 > IPv6 Snooping, as shown below: 311