D-Link DGS-1510-28P User Manual - Page 365
DDM RX Power Threshold Settings, Action, Delete, Low Alarm, Low Warning, High Alarm, High Warning
View all D-Link DGS-1510-28P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 365 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Figure 10-6 DDM TX Power Threshold Settings window The fields that can be configured are described below: Parameter Unit Port Action Type Power Unit Value Description Select the switch unit that will be used for this configuration here. Select the port used for the configuration here. Select the action that will be taken here. Options to choose from are Add and Delete. Select the type of TX power threshold. Options to choose from are Low Alarm, Low Warning, High Alarm, and High Warning. Select the power unit here. Options to choose from are mW and dBm. Enter the threshold value. When selecting mW in the Power Unit drop-down list, this value must be between 0 and 6.5535. When selecting dBm in the Power Unit drop-down list, this value must be between -40 and 8.1647. Click the Apply button to accept the changes made. DDM RX Power Threshold Settings This window is used to configure the threshold of RX power for specific ports on the Switch. To view the following window, click OAM > DDM > DDM RX Power Threshold Settings, as show below: Figure 10-7 DDM RX Power Threshold Settings window The fields that can be configured are described below: 357