D-Link DGS-1510-28P User Manual - Page 64
DHCP Local Relay VLAN, DHCPv6 Relay, DHCPv6 Relay Global Settings
View all D-Link DGS-1510-28P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter Unit From Port / To Port Format Type Value Description Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select the DHCP information circuit ID format. Option to choose from is Vendor3. Select the DHCP information circuit ID format typ. Options to choose from are Remote ID, and Circuit ID. Enter the vendor-defined string. Click the Apply button to accept the changes made. DHCP Local Relay VLAN This window is used to configure local relay on a VLAN or a group of VLANs. To view the following window, click Management > DHCP > DHCP Relay > DHCP Local Relay VLAN, as shown below: Figure 4-34 DHCP Local Relay VLAN window The fields that can be configured are described below: Parameter DHCP Local Relay VID List State Description Enter the VLAN ID for DHCP local relay. Tick the All VLANs check box to select all VLANs. Select this option to enable or disable the DHCP local relay on the specific VLAN(s). Click the Apply button to accept the changes made. DHCPv6 Relay DHCPv6 Relay Global Settings This window is used to configure the DHCPv6 relay remote ID. To view the following window, click Management > DHCP > DHCPv6 Relay > DHCPv6 Relay Global Settings, as shown below: 56