D-Link DGS-1510-28P User Manual - Page 36

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide To: Month To: Time (HH:MM) Offset Select the month that summer time will end. Select the time of the day that summer time will end. Enter the number of minutes to add during summer time. The default value is 60. The range of this offset is 30, 60, 90 and 120. The fields that can be configured for Date Setting are described below: Parameter From: Date of the Month From: Month From: Year From: Time (HH:MM) To: Date of the Month To: Month To: Year To: Time (HH:MM) Offset Description Select date of the month that summer time will start. Select the month that summer time will start. Enter the year that the summer time will start. Select the time of the day that summer time will start. Select date of the month that summer time will end. Select the month that summer time will end. Enter the year that the summer time will end. Select the time of the day that summer time will end. Enter the number of minutes to add during summer time. The default value is 60. The range of this offset is 30, 60, 90 and 120. Click the Apply button to accept the changes made. SNTP Settings This window is used to configure the time settings for the Switch. To view the following window, click System > Time and SNTP > SNTP Settings, as shown below: Figure 3-22 SNTP Settings window The fields that can be configured for SNTP Global Settings are described below: Parameter SNTP State Poll Interval Description Select this option to enable or disable SNTP. Enter the synchronizing interval in seconds. The value is from 30 to 99999 seconds. The default interval is 720 seconds. 28