D-Link DGS-1510-28P User Manual - Page 180

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Ethernet Type Mask CoS VID Time Range Action hexadecimal value will automatically be entered. Enter the Ethernet type mask hexadecimal value here. This value must be between 0x0 and 0xFFFF. When any Ethernet type profile is selected in the Specify Ethernet Type drop-down list, the appropriate hexadecimal value will automatically be entered. Select the CoS value used here. This value is between 0 and 7. Enter the VLAN ID that will be associated with this ACL rule here. This value must be between 1 and 4094. Enter the name of the time range to associate with this ACL rule. Select the action that this rule will take here. Options to choose from are Permit and Deny. Click the Back button to return to the previous window. Click the Next button to continue. After clicking the IPv4 radio button and the Next button, the following window will appear. Figure 8-5 ACL Configuration Wizard (Add Rule for IPv4 ACL) window This window has a dynamic section. Every selection made in the Protocol Type drop-down list will change the bottom part of this window. The fixed fields that can be configured are described below: Parameter Sequence No. Protocol Type Description Enter the ACL rule number here. This value must be between 1 and 65535. Select Auto Assign to automatically generate an ACL rule number for this entry. Select the protocol type option here. Options to choose from are TCP, UDP, ICMP, EIGRP, ESP, GRE, IGMP, OSPF, PIM, VRRP, IP-in-IP, PCP, Protocol ID, and None. After selecting the TCP option as the Protocol Type, the following section will appear. 172