Dell PowerConnect W-IAP92 Dell Instant 6.1.2.3-2.0.0.0 User Guide - Page 118
Access, Administrator assigned, 4 GHz, Channel, Transmit power,
View all Dell PowerConnect W-IAP92 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Figure 89 Configuring Administrator Assigned Radio Settings for IAP 4. Select the Access Mode from the drop-down list. NOTE: Select the Monitor Mode to configure the specific IAP in the Instant network in Monitor Mode and click OK. 5. Select Administrator assigned in 2.4 GHz and 5 GHz band sections. 6. Select appropriate channel number from the Channel drop-down list for both 2.4 GHz and 5 GHz band sections. 7. Enter appropriate transmit power value in the Transmit power text box in 2.4 GHz and 5 GHz band sections. 8. Click OK. 118 | Adaptive Radio Management Dell PowerConnect W-Series Instant Access Point 6.1.2.3-2.0.0.0 | User Guide
118
|
Adaptive Radio Management
Dell PowerConnect W-Series Instant Access Point 6.1.2.3-2.0.0.0
| User Guide
Figure 89
Configuring Administrator Assigned Radio Settings for IAP
4.
Select the
Access
Mode from the drop-down list.
5.
Select
Administrator assigned
in
2.4 GHz
and
5 GHz
band sections.
6.
Select appropriate channel number from the
Channel
drop-down list for both
2.4 GHz
and
5 GHz
band
sections.
7.
Enter appropriate transmit power value in the
Transmit power
text box in
2.4 GHz
and
5 GHz
band sections.
8.
Click
OK.
NOTE: Select the Monitor Mode to configure the specific IAP in the Instant network in Monitor Mode and click OK.