Dell PowerConnect W-IAP92 Dell Instant 6.1.2.3-2.0.0.0 User Guide - Page 43
Conditions for Adding an Employee Network-Security Tab Continued, Both WPA-2 & WPA
View all Dell PowerConnect W-IAP92 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Table 6 Conditions for Adding an Employee Network-Security Tab (Continued) If then, You want to use the default security level, Personal You select the Open security level Perform the following steps: 1. Select the required key options from the Key management drop-down list. Available options are: WPA-2 Personal WPA Personal Both (WPA-2 & WPA) Static WEP If you have selected Static WEP, then do the following: Select appropriate WEP key size from the WEP key size drop-down list. Available options are 64-bit and 128-bit. Select appropriate Tx key from the Tx Key drop-down list. Available options are 1, 2, 3,and 4. Enter an appropriate WEP key and reconfirm. For more information on encryption and recommended encryption type, see Chapter 9, "Encryption" . 2. Select a passphrase format from the Passphrase format drop-down list. Available options are: 8-63 alphanumeric chars 64 hexadecimal chars 3. Enter a passphrase in the Passphrase text box and reconfirm. 4. Select the required option from the Mac authentication drop-down list. Available options are Enabled and Disabled When Enabled, user must configure at least one RADIUS server for authentication server. See "Mac Authentication" on page 91 for further details Select the required Mac authentication from the Mac authentication dropdown list. Available options are: Enabled and Disabled When Enabled, user must configure at least one RADIUS server for authentication server. See "Mac Authentication" on page 91 for further details. Dell PowerConnect W-Series Instant Access Point 6.1.2.3-2.0.0.0 | User Guide Wireless Network | 43