Dell PowerConnect W-IAP92 Dell Instant 6.1.2.3-2.0.0.0 User Guide - Page 65
Get IP address from DHCP server, Specify statically, Specify, statically, IP address
View all Dell PowerConnect W-IAP92 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Figure 47 Configuring IAP Settings-Connectivity Tab 4. Select the Get IP address from DHCP server or Specify statically option. If you selected the Specify statically option, perform the following steps: 1. Enter the new IP address for the IAP in the IP address text box. 2. Enter the netmask of the network in the Netmask text box. 3. Enter the IP address of the default gateway in the Default gateway text box. 4. Enter the IP address of the DNS server in the DNS server text box. 5. Enter the domain name in the Domain name text box. Figure 48 Configuring IAP Connectivity Settings-Specifying Static Settings 5. Click OK, and reboot the IAP. Dell PowerConnect W-Series Instant Access Point 6.1.2.3-2.0.0.0 | User Guide Managing IAPs | 65
Dell PowerConnect W-Series Instant Access Point 6.1.2.3-2.0.0.0
| User Guide
Managing IAPs
|
65
Figure 47
Configuring IAP Settings—Connectivity Tab
4.
Select the
Get IP address from DHCP server
or
Specify statically
option. If you selected the
Specify
statically
option, perform the following steps:
1.
Enter the new IP address for the IAP in the
IP address
text box.
2.
Enter the netmask of the network in the
Netmask
text box.
3.
Enter the IP address of the default gateway in the
Default gateway
text box.
4.
Enter the IP address of the DNS server in the
DNS server
text box.
5.
Enter the domain name in the
Domain name
text box.
Figure 48
Configuring IAP Connectivity Settings—Specifying Static Settings
5.
Click
OK,
and reboot the IAP.