Dell PowerConnect W-IAP92 Dell Instant 6.1.3.1-3.0.0.0 User Guide - Page 103

Figure 79 Configuring Captive Portal when Editing a Guest Network The appearance of a splash page can be customized as required. For information on customizing a splash page, see "Customizing a Splash Page" on page 104. 4. Click Next and click Finish. Configuring Internal Captive Portal with External Radius Server Authentication when Adding a Guest Network To configure internal captive portal with external radius server authentication, perform the following steps: 1. In the Network tab, click the New link. The New Network window opens. 2. In the Basic Info tab, perform the following: 1. Enter a name for the network in the Name (SSID) text box. 2. Select Guest and then click Next. 3. Use the VLAN tab, to specify how the clients on this network will get their IP address and VLAN.Click Next to continue. 4. In the Security tab, select Internal - Authenticated under the splash page type. 5. Select an external RADIUS server from the Authentication server drop-down list to authenticate user credentials at run time. If there is no external RADIUS server in the drop-down list, click New to add a RADIUS server. For information on configuring external RADIUS server, see "External RADIUS Server" on page 94. 6. Click Next and then click Finish. Dell PowerConnect W-Series Instant Access Point 6.1.3.1-3.0.0.0 | User Guide Authentication | 103