Dell PowerConnect W-IAP92 Dell Instant 6.1.3.1-3.0.0.0 User Guide - Page 48

Table 5 Conditions for Adding an Employee Network- Security Tab (Continued) If then, You want to use the default security level, Personal Perform the following steps: 1. Select the required key options from the Key management drop-down list. Available options are:  WPA-2 Personal  WPA Personal  Both (WPA-2 & WPA)  Static WEP If you have selected Static WEP, do the following:  Select appropriate WEP key size from the WEP key size drop-down list. Available options are 64-bit and 128-bit.  Select appropriate Tx key from the Tx Key drop-down list. Available options are 1, 2, 3,and 4.  Enter an appropriate WEP key and reconfirm. For more information on encryption and recommended encryption type, see Chapter 9, "Encryption" . 2. Select a passphrase format from the Passphrase format drop-down list. Available options are:  8-63 alphanumeric chars  64 hexadecimal chars 3. Enter a passphrase in the Passphrase text box and reconfirm. 4. Select the required option from the MAC authentication drop-down list. Available options are  Enabled and Disabled When Enabled, user must configure at least one RADIUS server for authentication server. See "MAC Authentication" on page 109 for further details. 5. Authentication server 1- Select the required Authentication server option from the drop-down list. Available options are:  New- If you select this option, an external radius server has to be configured to authenticate the users. For information on configuring an external RADIUS server, see Chapter 8, "Authentication" .  InternalServer- If you select this option, users who are required to authenticate with the internal RADIUS server must be added. Click the Users link to add the users.For information on adding a user, see "Adding a User" on page 203. 6. Reauth interval- When set to a value greater than zero, the Access Points will periodically reauthenticate all associated and authenticated clients. 7. Blacklisting- Select Enabled if you want clients to be blacklisted after a certain number of authentication failures. 8. Max authentication failures- Users who fail to authenticate the number of times specified here will be dynamically blacklisted. The maximum value for this entry is 10. NOTE: Navigate to PEF > Blacklisting in the WebUI to specify the duration of the blacklisting on the Blacklisting tab of the PEF window. 9. For Internal users- Click Users to populate the system's internal authentication server with users. For information about adding a user, see "Adding a User" on page 203. 10. Click Upload Certificate and browse to upload a certificate file for the internal server. See "Certificates" on page 111 for more information. 48 | Wireless Network Dell PowerConnect W-Series Instant Access Point 6.1.3.1-3.0.0.0 | User Guide