Dell PowerConnect W-IAP92 Dell Instant 6.1.3.1-3.0.0.0 User Guide - Page 112
Loading Certificates using Instant WebUI, Instant WebUI, Maintenance > Certificates
View all Dell PowerConnect W-IAP92 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
There are two ways to upload the certificates. 1. Instant WebUI: Navigate to Maintenance > Certificates and then click Upload New Certificate to directly upload the certificate. Refer Loading Certificates using Instant WebUI for further instructions. 2. Dell PowrConnect W-AirWave: Navigate to Device Setup > Certificate and then click Add New Certificate. Refer Loading Certificates using Dell PowrConnect W-AirWave for further instructions. Loading Certificates using Instant WebUI To load a certificate in the Instant UI, perform the following steps: 1. Navigate to the Maintenance > Certificates page. Figure 87 Loading Certificates 112 | Authentication Dell PowerConnect W-Series Instant Access Point 6.1.3.1-3.0.0.0 | User Guide
112
|
Authentication
Dell PowerConnect W-Series Instant Access Point 6.1.3.1-3.0.0.0
| User Guide
There are two ways to upload the certificates.
1.
Instant WebUI:
Navigate to
Maintenance > Certificates
and then click
Upload New Certificate
to directly upload the certificate. Refer
Loading Certificates using Instant WebUI
for further instructions.
2.
Dell PowrConnect W-AirWave:
Navigate to
Device
Setup > Certificate
and then click
Add New Certificate
.
Refer
Loading Certificates using Dell PowrConnect W-AirWave
for further instructions.
Loading Certificates using Instant WebUI
To load a certificate in the Instant UI, perform the following steps:
1.
Navigate to the
Maintenance > Certificates
page.
Figure 87
Loading Certificates