Dell PowerEdge R830 Owners Manual - Page 107
Integrated storage controller card
![]() |
View all Dell PowerEdge R830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Integrated storage controller card Your system includes a dedicated expansion card slot on the system board for an integrated storage controller card. The integrated storage controller card provides the integrated storage subsystem for the internal hard drives in your system.The controller supports SAS and SATA hard drives and also enables you to set up the hard drives in RAID configurations. The RAID configurations depend on the version of the storage controller included with your system. The controller supports SAS hard drives. Removing the integrated storage controller card Prerequisites CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product. 1. Follow the safety guidelines listed in the Safety instructions section. 2. Follow the procedure listed in the Before working inside your system section. 3. Remove the cooling shroud. 4. Keep the Phillips #2 screwdriver ready. Steps 1. Lift the expansion card latch out of the slot. 2. Pull and slide the card out from the connector on riser card 3. Figure 42. Removing the integrated storage controller card 1. storage controller card 3. riser card 3 2. expansion card latch 4. SAS cable (2) Installing and removing system components 107
![](/manual_guide/products/dell-poweredge-r830-owners-manual-3f71d3b/107.png)