Dell PowerEdge R830 Owners Manual - Page 57
Boost Enabled Cores for Processor 2, Performance Per Watt Optimized DAPC
![]() |
View all Dell PowerEdge R830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Option System Profile Description Sets the system profile. If you set the System Profile option to a mode other than Custom, the BIOS automatically sets the rest of the options. You can only change the rest of the options if the mode is set to Custom. This option is set to Performance Per Watt Optimized (DAPC) by default. DAPC is Dell Active Power Controller. NOTE: All the parameters on the system profile setting screen are available only when the System Profile option is set to Custom. CPU Power Management Memory Frequency Turbo Boost Energy Efficient Turbo Sets the CPU power management. This option is set to System DBPM (DAPC) by default. Sets the speed of the memory. You can select Maximum Performance, Maximum Reliability, or a specific speed. Enables or disables the processor to operate in the turbo boost mode. This option is set to Enabled by default. Enables or disables the Energy Efficient Turbo option. Energy Efficient Turbo (EET) is a mode of operation where a processor's core frequency is adjusted to be within the turbo range based on workload. C1E C States Collaborative CPU Performance Control Memory Patrol Scrub Memory Refresh Rate Uncore Frequency Enables or disables the processor to switch to a minimum performance state when it is idle. This option is set to Enabled by default. Enables or disables the processor to operate in all available power states. This option is set to Enabled by default. Enables or disables the CPU power management option. When set to Enabled, the CPU power management is controlled by the OS DBPM and the System DBPM (DAPC). This option is set to Disabled by default. Sets the memory patrol scrub frequency. This option is set to Standard by default. Sets the memory refresh rate to either 1x or 2x. This option is set to 1x by default. Enables you to select the Processor Uncore Frequency option. Dynamic mode enables the processor to optimize power resources across the cores and uncore during runtime. The optimization of the uncore frequency to either save power or optimize performance is influenced by the setting of the Energy Efficiency Policy option. Energy Efficient Policy Enables you to select the Energy Efficient Policy option. The CPU uses the setting to manipulate the internal behavior of the processor and determines whether to target higher performance or better power savings. Number of Turbo Boot Enabled Cores for Processor 1 NOTE: If there are two processors installed in the system, you see an entry for Number of Turbo Boost Enabled Cores for Processor 2. Controls the number of turbo boost enabled cores for processor 1. The maximum number of cores is enabled by default. Monitor/Mwait Enables the Monitor/Mwait instructions in the processor. This option is set to Enabled for all system profiles, except Custom by default. NOTE: This option can be disabled only if the C States option in the Custom mode is set to disabled. NOTE: When C States is set to Enabled in the Custom mode, changing the Monitor/Mwait setting does not impact the system power or performance. Related references System Profile Settings on page 56 Pre-operating system management applications 57
![](/manual_guide/products/dell-poweredge-r830-owners-manual-3f71d3b/57.png)