Dell PowerEdge R830 Owners Manual - Page 153
Installing the hard drive backplane
![]() |
View all Dell PowerEdge R830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Hard drives on page 139 After working inside your system on page 64 Installing the hard drive backplane Prerequisites 1. Follow the safety guidelines listed in the Safety instructions section. 2. Follow the procedure listed in the Before working inside your system section. CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product. Steps 1. Connect the SAS/SATA/SSD data, signal, and power cables to the backplane. 2. Use the hooks on the chassis as guides to align the hard drive backplane. 3. Lower the hard drive backplane until the release tabs snap into place. Figure 85. Installing the 2.5 inch (x16) SAS/SATA backplane 1. hooks (3) 3. hard drive backplane 5. backplane signal cable 7. SAS cable (2) 9. hard drive connector on the backplane 2. securing slots (3) 4. backplane power cable 6. release tab (2) 8. mini SAS connector (2) Installing and removing system components 153
![](/manual_guide/products/dell-poweredge-r830-owners-manual-3f71d3b/153.png)