Dell PowerEdge R830 Owners Manual - Page 115
Installing expansion card risers
View all Dell PowerEdge R830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Next steps 1. If removed, install an expansion card on the riser. 2. If applicable, replace the expansion card riser. 3. Follow the procedure listed in the After working inside your system section. Related references Safety instructions on page 63 Related tasks Before working inside your system on page 64 Installing expansion card risers on page 115 After working inside your system on page 64 Installing expansion card risers Prerequisites 1. Follow the safety guidelines listed in the Safety instructions section. 2. Follow the procedure listed in the Before working inside your system section. 3. If applicable, install the expansion card(s) into the expansion card riser(s). CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product. Steps 1. Align the expansion card riser with the connectors and the riser guides on the system board. 2. Lower the expansion card riser into place until the expansion card riser is fully seated in the connector. Installing and removing system components 115