Dell PowerEdge R830 Owners Manual - Page 53
Integrated Devices, Viewing Integrated Devices, Integrated Devices details
View all Dell PowerEdge R830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Integrated Devices You can use the Integrated Devices screen to view and configure the settings of all integrated devices including the video controller, integrated RAID controller, and the USB ports. Related references System BIOS on page 35 Related tasks Integrated Devices details on page 53 Viewing Integrated Devices on page 53 Viewing Integrated Devices To view the Integrated Devices screen, perform the following steps: Steps 1. Turn on, or restart your system. 2. Press F2 immediately after you see the following message: F2 = System Setup NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then restart your system and try again. 3. On the System Setup Main Menu screen, click System BIOS. 4. On the System BIOS screen, click Integrated Devices. Related references Integrated Devices on page 53 Related tasks Integrated Devices details on page 53 Integrated Devices details About this task The Integrated Devices screen details are explained as follows: Option Description USB 3.0 Setting User Accessible USB Ports Enables or disables the USB 3.0 support. Enable this option only if your operating system supports USB 3.0. If you disable this option, devices operate at USB 2.0 speed. USB 3.0 is enabled by default. Enables or disables the USB ports. Selecting Only Back Ports On disables the front USB ports, selecting All Ports Off disables all USB ports. The USB keyboard and mouse operate during boot process in certain operating systems. After the boot process is complete, the USB keyboard and mouse do not work if the ports are disabled. NOTE: Selecting Only Back Ports On and All Ports Off disables the USB management port and also restricts access to iDRAC features. Internal USB Port Integrated RAID Controller Enables or disables the internal USB port. This option is set to Enabled by default. Enables or disables the integrated RAID controller. This option is set to Enabled by default. Pre-operating system management applications 53