Dell PowerEdge R830 Owners Manual - Page 128
Idsdm
![]() |
View all Dell PowerEdge R830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Figure 60. Installing a full-height expansion card into the expansion card riser 3 1. expansion card holder 3. expansion card connector 2. expansion card 4. expansion card riser 3 Next steps 1. If applicable, connect any cables to the expansion card. 2. Install any device drivers needed for the card as described in the documentation for the card. 3. Follow the procedure listed in the After working inside your system section. Related references Safety instructions on page 63 Related tasks Before working inside your system on page 64 Removing an expansion card from the expansion card riser 3 on page 124 After working inside your system on page 64 IDSDM The Internal Dual SD module (IDSDM) provides you with a redundant SD card solution. You can configure the IDSDM for storage or as the OS boot partition. The IDSDM card offers the following features: ● Dual card operation - maintains a mirrored configuration by using SD cards in both the slots and provides redundancy. NOTE: When the Redundancy option is set to Mirror Mode in the Integrated Devices screen of System Setup, the information is replicated from one SD card to another. ● Single card operation - single card operation is supported, but without redundancy. 128 Installing and removing system components
![](/manual_guide/products/dell-poweredge-r830-owners-manual-3f71d3b/128.png)