Dell PowerEdge R830 Owners Manual - Page 50
SATA Settings, Viewing SATA Settings, SATA Settings details
View all Dell PowerEdge R830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
SATA Settings You can use the SATA Settings screen to view the SATA settings of SATA devices and enable RAID on your system. Related references System BIOS on page 35 Related tasks SATA Settings details on page 50 Viewing SATA Settings on page 50 Viewing SATA Settings To view the SATA Settings screen, perform the following steps: Steps 1. Turn on, or restart your system. 2. Press F2 immediately after you see the following message: F2 = System Setup NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then restart your system and try again. 3. On the System Setup Main Menu screen, click System BIOS. 4. On the System BIOS screen, click SATA Settings. Related references SATA Settings on page 50 Related tasks SATA Settings details on page 50 SATA Settings details About this task The SATA Settings screen details are explained as follows: Option Description Embedded SATA Security Freeze Lock Write Cache Port A Enables the embedded SATA option to be set to Off, ATA, AHCI, or RAID modes. This option is set to AHCI by default. Sends Security Freeze Lock command to the Embedded SATA drives during POST. This option is applicable only for ATA and AHCI modes. Enables or disables the command for Embedded SATA drives during POST. Sets the drive type of the selected device. For Embedded SATA settings in ATA mode, set this field to Auto to enable BIOS support. Set it to OFF to turn off BIOS support. For AHCI or RAID mode, BIOS support is always enabled. Option Description Model Drive Type Specifies the drive model of the selected device. Specifies the type of drive attached to the SATA port. 50 Pre-operating system management applications