Dell PowerEdge R830 Owners Manual - Page 92

Figure 30. Removing the memory module a. memory module b. memory module socket c. memory module socket ejector (2) Next steps 1. Install the memory module. NOTE: If you are removing the memory module permanently, install a memory module blank. 2. Install the cooling shroud. 3. Follow the procedure listed in the After working inside your system section. Related references Safety instructions on page 63 Related tasks Before working inside your system on page 64 Removing the cooling shroud on page 76 Installing memory modules on page 92 After working inside your system on page 64 Installing memory modules Prerequisites NOTE: The memory modules are hot to touch for some time after the system has been powered down. Allow the memory modules to cool before handling them. Handle the memory modules by the card edges and avoid touching the components or metallic contacts on the memory module. CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product. 1. Follow the safety guidelines listed in the Safety instructions section. 2. Follow the procedure listed in the Before working inside your system section. 92 Installing and removing system components