Dell PowerEdge R830 Owners Manual - Page 27
Serial connector, VGA ports, Internal Dual SD Module, Video specifications
View all Dell PowerEdge R830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
● two 10 Gbps NOTE: You can install up to six PCIe add-on NIC cards. Serial connector The serial connector connects a serial device to the system. The PowerEdge R830 system supports one serial connector on the back panel, which is a 9-pin connector, Data Terminal Equipment (DTE), 16550-compliant. VGA ports The Video Graphic Array (VGA) port enables you to connect the system to a VGA display. The PowerEdge R830 system supports two 15-pin VGA ports on the front and back panels. Internal Dual SD Module The PowerEdge R830 system supports two optional flash memory card slots with an internal dual SD module. NOTE: One card slot is dedicated for redundancy. Video specifications The PowerEdge R830 system supports Matrox G200eR2 graphics card with 16 MB capacity. Table 15. Supported video resolution options Resolution 640x480 Refresh rate (Hz) 60,70 Color depth (bits) 8, 16, 32 800x600 60,75, 85 8, 16, 32 1024x768 60,75, 85 8, 16, 32 1152x864 60,75, 85 8, 16, 32 1280x1024 60,75 8, 16, 32 1440x900 60 8, 16, 32 Environmental specifications NOTE: For additional information about environmental measurements for specific system configurations, see Dell.com/ environmental_datasheets. Table 16. Temperature specifications Temperature Specifications Storage -40°C to 65°C (-40°F to 149°F) Continuous operation (for altitude less than 950 m or 5°C to 40°C (41°F to 104°F) with no direct sunlight on the 3117 ft) equipment. Fresh air For information about fresh air, see Expanded Operating Temperature section. Maximum temperature gradient (operating and storage) 20°C/h (68°F/h) Technical specifications 27