Dell PowerEdge R830 Owners Manual - Page 120
Installing an expansion card into expansion card riser 1
![]() |
View all Dell PowerEdge R830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Related references Safety instructions on page 63 Related tasks Before working inside your system on page 64 Installing an expansion card into expansion card riser 1 on page 120 After working inside your system on page 64 Installing an expansion card into expansion card riser 1 Prerequisites CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product. 1. Follow the safety guidelines listed in the Safety instructions section. 2. Follow the procedure listed in the Before working inside your system section. 3. Remove the expansion card riser 1. Steps 1. If applicable, unpack the expansion card and prepare it for installation. For instructions, see the documentation accompanying the card. 2. Press the expansion card retention latch and pull it open from the expansion card riser. 3. Pull the expansion card release latch open. 4. Holding the card by its edges, insert the card edge connector firmly into the expansion card connector until the card is fully seated. 120 Installing and removing system components
![](/manual_guide/products/dell-poweredge-r830-owners-manual-3f71d3b/120.png)