Dell PowerEdge R830 Owners Manual - Page 25
Chassis weight, Processor specifications, PSU specifications, System battery specifications,
![]() |
View all Dell PowerEdge R830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Table 9. Dimensions of the PowerEdge R830 system X Xa Y Z (with bezel) Zb (without bezel) 482.4 mm (18.99 inches) 434.0 mm (17.08 inches) 86.8 mm (3.42 777.6 mm (30.61 740.6 mm inches) inches) (29.16 inches) Za (with bezel) 35.7 mm (1.41 inches) Za (without bezel) 20.4 mm (0.80 inches) Chassis weight Table 10. Chassis weight System Maximum weight (with all hard drives/SSDs) PowerEdge R830 31.7 kg (69.89 lb) Minimum weight (without any hard drives) 10.5 kg (23.15 lb) Processor specifications The PowerEdge R830 system supports up to four Intel Xeon E5-4600 v4 product family processors. PSU specifications The PowerEdge R830 system supports up to two AC redundant power supply units (PSU). Table 11. PSU specifications PSU Class 750 W AC Platinum Heat dissipation (maximum) Frequency Voltage 50/60 Hz 100-240 V AC, autoranging 1600 W AC Platinum 100-240 V AC, autoranging NOTE: If a system with 1600 W PSUs operates from 100 to 120 V, then the power rating per PSU is derated to 800 W. NOTE: Heat dissipation is calculated using the PSU wattage rating. NOTE: This system is also designed to connect to the IT power systems with a phase to phase voltage not exceeding 230 V. NOTE: PSUs rated for 1600 W and higher require high-line voltage (200-240 V) to supply their rated capacity. System battery specifications The PowerEdge R830 system supports CR 2032 3.0-V lithium coin cell system battery. Expansion bus specifications The PowerEdge R830 system supports PCI express (PCIe) generation 3 expansion cards, which need to be installed on the system board using expansion card risers. This system supports three types of expansion card risers. Technical specifications 25
![](/manual_guide/products/dell-poweredge-r830-owners-manual-3f71d3b/25.png)