Dell PowerEdge R830 Owners Manual - Page 127
Installing a half-height expansion card into the expansion card riser 3
![]() |
View all Dell PowerEdge R830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
3. Remove the expansion card riser 3. Steps 1. If applicable, unpack the expansion card and prepare it for installation. For instructions, see the documentation accompanying the card. 2. Open the expansion card retention latch. 3. Holding the card by its edges, insert the card-edge connector firmly into the expansion card connector until the card is fully seated. 4. If you are installing a full-height expansion card, pull the expansion card holder toward the expansion card riser. Ensure that the expansion card rests between the grooves on the expansion card holder. 5. Close the expansion card riser latch into the slot. Figure 59. Installing a half-height expansion card into the expansion card riser 3 1. expansion card 3. expansion card connector 2. expansion card retention latch 4. expansion card riser Installing and removing system components 127
![](/manual_guide/products/dell-poweredge-r830-owners-manual-3f71d3b/127.png)