Epson 9600 Service Manual - Page 182
HEAD_SLIDE Sensor ASSY
UPC - 010343841888
View all Epson 9600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
EPSON Stylus Pro 7600/9600 4.3.8 HEAD_SLIDE Sensor ASSY C A U T IO N When unlocking the carriage, do not move the carriage by about 2 cm or more with the cutter pushed into the innermost position; otherwise, the cutter edge would be damaged. 1. Remove the R Side Cover. (p.160) 2. Remove the Access Cover. (See Removing the Access Cover on page 167) 3. While pushing the cutter area gently, shift the carriage to the left about 2 cm to unlock the carriage and then move the carriage to the left from the capping position. (See Figure 4-24) 4. Disconnect the connector (CN29: red 4-pin) of the HEAD_SLIDE Sensor ASSY from the Main Board and take it out through the hole in the R Side Frame. 5. Remove the one (CP(W): M3×6) screw securing the HEAD_SLIDE Sensor ASSY and remove the HEAD_SLIDE Sensor ASSY. (See Figure 4-44) 6. Release the harness for the HEAD_SLIDE Sensor ASSY from the five cable clamps on the Maintenance ASSY and CR Rail ASSY. (See Figure 4-45) Revision A Screws (CP(W): M3×6) HEAD_SLIDE Sensor ASSY Figure 4-44. Removing the HEAD_SLIDE Sensor ASSY Clamp Clamp Clamp Disassembly & Assembly Clamp Figure 4-45. Releasing the HEAD_SLIDE Sensor ASSY Harness Disassembly and Assembly of Carriage (CR) Mechanism 182