Epson 9600 Service Manual - Page 251
Parameter Copying, 2.3.15, Bi-D2 Adjustment PG=0.7mm, 2.3.16, Bi-D3 Adjustment PG=2.1mm
UPC - 010343841888
View all Epson 9600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 251 highlights
EPSON Stylus Pro 7600/9600 5.2.3.14 Parameter Copying In actual processing, at each point when the adjusted value is determined in "5.2.3.13 Round Trip Print Position Adjustment (Bi-D Adjustment)" (p.248), the compensation value obtained by computation is copied into each area. Actually, therefore, copy processing by this function is not required. (See Figure 5-51) 5.2.3.15 Bi-D2 Adjustment (PG=0.7mm) CHECK P O IN T When this adjustment is to be performed, use the following paper since setting must be made for PG=0.7mm. Paper to be used: Authentic glossy paper (Example: Photo Glossy Paper #MCSRxxR2) Make this adjustment, as required, after executing "5.2.3.13 Round Trip Print Position Adjustment (Bi-D Adjustment)" (p.248). The adjustment procedure is the same as that for "5.2.3.13 Round Trip Print Position Adjustment (Bi-D Adjustment)" (p.248). 5.2.3.16 Bi-D3 Adjustment (PG=2.1mm) CHECK P O IN T When this adjustment is to be performed, use the following paper since setting must be made for PG=2.1mm. Paper to be used: Authentic plain paper roll (PMSPxxR6) Make this adjustment, as required, after executing "5.2.3.13 Round Trip Print Position Adjustment (Bi-D Adjustment)" (p.248). The adjustment procedure is the same as that for "5.2.3.13 Round Trip Print Position Adjustment (Bi-D Adjustment)" (p.248). Revision A Copy Param. ? [Enter] WAIT Figure 5-51. Menu Transition for Parameter Copying Adjustment Self-diagnostic Function 251